IM1900 Series Load / Weighing Indicator are
Micro-controller based highly versatile controllers for Weighing / Batching
Applications. Various controlling options are available to control drive,
solenoid etc. to control material in hopper. Load cell / weigh bridge
interface is provided to cover wide range of applications. typical
applications are weighing and batching, loss in weight control, hopper
Options like Printer interface / PC Interface / 4-20 mA output make it
versatile connect to PC or SCADA software or feed values to PLC. Remote
large displays are available to show the weighing results along with
information like set values, weight, charges etc. for applications like
Truck weigh bridges, Octroi information displays etc.
Apart from weighing application, these indicators are useful for test and
measuring applications like tensile / compression / burst / pressure
measurement. Peak hold facility makes it useful to measure the impact /
breaking tension. Along with elongation measurement, these controllers can
be used to calculate properties like Young’s Modulus, Shear Stress
Microcontroller based Digital Circuitry
Four / Five digit LED display for parameter indication.
Optional 4 digit display for setpoint / Peal load display.
Dust proof membrane keypad for programming.
Load Cell Input interface upto 3mV / V loadcell.
Optional 4-20 mA retransmission facility for load.
On Site Software Calibration apart from Hardware calibration
NV RAM storage to retain setpoint in case of power failure.
Optional Control output Relay outputs rated 230V / 5A (resistive)
for Drive control in batching applications.
High Low relay alarm outputs optional.
RS 232 Serial Interface for PC or Serial Printer (Optional)
Size 96 x 96 x 150 mm. (DIN standard).
Calibration Certification as per ISO9000 norms.
4 digit Load Indicator
Load Indicator with High Low limits
Load & Elongation Indicator
Peak Load Indicator
Weighing Controller with Setpoint and Inflation
H / L :
High Low Alarms
RS232 Text type output
4-20m A Current Output
RS485 Modbus Output
See also : Data Logger